Parts for Kenmore Models 6105A REV A

Dryer lint screen filter (dryer lint screen)

The lint filter with handle is used to collect lint and debris as it passes through the dryer vent. It is recommended to clean the lint filter before every load. If your dryer takes too long to dry you may need to replace the filter. This lint filter includes a white handle and measures approximately 23 inches including the handle. This is a genuine OEM part.

Easy Part #:: EAP11757278

Availability:: In Stock

Price:: $43.25

Dryer lint filter (filter assembly,lint)

The Dryer's Lint Filter is used to collect lint during the dryer cycle as it passes through the dryer vent, in order to prevent damage to the machine. This manufacturer-approved part comes in gray, measures around 12 inches wide by 11 inches high, and is easy to install. It slides into the lint filter slot in your dryer. If there is visible damage to the screen then it's time to replace the part. We recommend that you thoroughly clean the lint filter before every load, but even with good maintenance, this hard-working part is often damaged or worn over time. If your dryer isn't drying quickly, the filter may be responsible. The manufacturer has made an authorized substitution to the lint filter. Special details: When replacing lint screen ADQ56656401 you may need to also replace lint screen housing MCK49049101 and lint screen guide MEA49050001 to prevent items from catching on the lint screen, depending on your model.

Easy Part #:: EAP3531962

Availability:: In Stock

Price:: $49.34

Drain pump with pulley (impeller)

This drain pump with pulley has 2 ports. The pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period. If your washer will not drain, is noisy, leaking or has a burning smell, you may need to replace the drain pump. This is a genuine OEM part. Please remember to shut off the water supply and disconnect the power to the washer before starting your repair.

Easy Part #:: EAP11741799

Availability:: In Stock

Price:: $71.42

Ice bin auger drum (refrigerator auger drum)

This white ice bin auger drum comes with a washer.

Easy Part #:: EAP372186

Availability:: In Stock

Price:: $48.76

Water filter cap - black (cap, water filter (black))

This black cap covers the water filter.

Easy Part #:: EAP11739970

Availability:: In Stock

Price:: $24.50

Lint filter (screen, lint (white))

The lint filter with handle is used to collect lint and debris as it passes through the dryer vent. It is recommended to clean the lint filter before every load. If your dryer takes too long to dry you may need to replace the filter. This lint filter includes a white handle and measures approximately 23 inches including the handle. This is a genuine OEM part.

Easy Part #:: EAP16744854

Availability:: In Stock

Price:: $37.80

Shock absorber kit (shock absorber)

The shock absorber kit is used for front load washers and includes 2 dual-stage shock absorbers, 1 spare shock mounting pin, and 4 locking nuts. These shock absorbers keep the washer from vigorous shaking during its cycles. If one or both of them break or wear out it will cause the washer to vibrate or shake and will need to be replaced. This kit is a genuine OEM part. Please remember to disconnect the power to your appliance before starting the repair.

Easy Part #:: EAP3508101

Availability:: In Stock

Price:: $36.90

Maintenance kit (Whirlpool dryer maintenance kit)

Includes Belt 8066065, Rollers WPW10314173, Pulley 691366, Clip 90296, Tri-ring W10512946. 4 Roller Kit 4392067

Easy Part #:: EAP373087

Availability:: In Stock

Price:: $27.62

Control bracket (bracket, control)

This bracket holds the micro switches and the light in the freezer dispenser section.

Easy Part #:: EAP11739027

Availability:: In Stock

Price:: $18.07

Washer lid switch (switch, lid)

The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed. This part includes the grounding wire.

Easy Part #:: EAP11745957

Availability:: In Stock

Price:: $37.01

Thrust washer (tub bearing washer)

This part is located between the drum support rollers and idler pulley in your dryer to help prevent the parts from bumping up against the brackets they are attached to. If your dryer has a burning smell, is noisy, or will not tumble, you may need to replace the thrust washer. The washer is 3/4 inches in diameter and a is genuine OEM part. It is recommended to disconnect the power to your dryer before you start your repair.

Easy Part #:: EAP11740482

Availability:: In Stock

Price:: $7.40

Lint filter (filter, lint)

Note: This part no longer comes with the felt seal. This filter collects lint as it passes through the dryer vent.

Easy Part #:: EAP11741919

Availability:: In Stock

Price:: $68.29

Corner tub baffle - lower right (baffle tub corner rh)

This baffle fits the lower right-hand corner of the dishwasher, is black in color, made of plastic, and has a matching left-hand lower corner baffle that is sold separately. The baffle is used to prevent water from leaking from the tub through the door. If your baffle is damaged, worn, or missing, it will cause the dishwasher to leak and the baffles will need to be replaced. It is recommended that you replace both left and right baffles at the same time. This is a genuine OEM part.

Easy Part #:: EAP263963

Availability:: In Stock

Price:: $22.06

Door hinge (hinge, door)

The door hinge attaches to the side of the door allowing the oven door to open, close, and stay open at an angle. If your door is not opening and closing correctly you may need to replace the hinge. It is recommended to replace both hinges at the same time. The hinge measures 20 1/2-inch and is made of metal. This is a genuine OEM part.